|
协调标准
|
正式实施日期
|
|
EN 845-1:2013
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
|
08/08/2015
|
|
EN 845-2:2013
Specification for ancillary components for masonry - Part 2: Lintels
|
08/08/2015
|
|
EN 845-3:2013
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
|
08/08/2015
|
|
EN 1344:2013
Clay pavers - Requirements and test methods
|
08/08/2015
|
|
EN 12566-3:2005+A2:2013
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
|
08/08/2015
|
|
EN 12566-7:2013
Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
|
08/08/2015
|
|
EN 12602:2008+A1:2013
Prefabricated reinforced components of autoclaved aerated concrete
|
08/08/2015
|
|
EN 13225:2013
Precast concrete products - Linear structural elements
|
08/08/2015
|
|
EN 13808:2013
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
|
08/08/2015
|
|
EN 14080:2013
Timber structures - Glued laminated timber and glued solid timber - Requirements
|
08/08/2015
|
|
EN 14342:2013
Wood flooring and parquet - Characteristics, evaluation of conformity and marking
|
08/08/2015
|
|
EN 14509:2013
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
|
08/08/2015
|
|
EN 14783:2013
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
|
08/08/2015
|
|
EN 14915:2013
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
|
08/08/2015
|
|
EN 15037-4:2010+A1:2013
Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
|
08/08/2015
|
|
EN 15037-5:2013
Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork
|
08/08/2015
|
|
EN 15286:2013
Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
|
08/08/2015
|
|
EN 15322:2013
Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
|
08/08/2015
|
|
EN 15382:2013
Geosynthetic barriers - Characteristics required for use in transportation infrastructure
|
08/08/2015
|
|
EN 15682-2:2013
Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
|
08/08/2015
|
|
EN 15683-2:2013
Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
|
08/08/2015
|
|
EN 16153:2013
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
|
01/01/2015
|
