|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 12621:2025
Machinery for supply and circulation of liquid coating materials - Safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 12757-1:2005+A1:2010
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13012:2012
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13012:2021
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13160-1:2003
Leak detection systems - Part 1: General principles |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13237:2012
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-1:2009
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-2:2004
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-3:2005
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-5:2011
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-6:2005
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13463-8:2003
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13616-1:2016
Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13616-1:2025
Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13616:2004
Overfill prevention devices for static tanks for liquid petroleum fuels
EN 13616:2004/AC:2006 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-1:2012
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-1:2021
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-2:2012
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-2:2021
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-3:2012
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-3:2021
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-4:2012
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13617-4:2021
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13760:2003
Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13760:2021
LPG equipment and accessories - Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13821:2002
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13852-1:2013
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13852-1:2025
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 13852-3:2021
Cranes - Offshore cranes - Part 3: Light offshore cranes
Notice 1: The normative references referred to in clause 2 of harmonised standard EN IEC 60079-0:2018 shall be read as EN IEC 60079-0:2018 corrected by EN IEC 60079-0:2018/AC:2020-02
Notice 2: The normative references referred to in clause 2 of harmonised standard EN ISO 80079-36:2016 shall be read as EN ISO 80079-36:2016 corrected by EN ISO 80079-36:2016/AC:2019
Restriction: this publication does not cover the following part of the standard:
column “Remarks/Notes” of Table ZB.1 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14034-1:2004+A1:2011
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14034-2:2006+A1:2011
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14034-3:2006+A1:2011
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14034-4:2004+A1:2011
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14373:2005
Explosion suppression systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14373:2021
Explosion suppression systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14373:2021+A1:2025
Explosion suppression systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14460:2006
Explosion resistant equipment |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14460:2018
Explosion resistant equipment |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14491:2012
Dust explosion venting protective systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14492-1:2006+A1:2009
Cranes - Power driven winches and hoists - Part 1: Power driven winches
EN 14492-1:2006+A1:2009/AC:2010 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14492-2:2006+A1:2009
Cranes - Power driven winches and hoists - Part 2: Power driven hoists
EN 14492-2:2006+A1:2009/AC:2010 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14522:2005
Determination of the auto ignition temperature of gases and vapours |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14591-1:2004
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
EN 14591-1:2004/AC:2006 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14591-2:2007
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
EN 14591-2:2007/AC:2008 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14591-4:2007
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
EN 14591-4:2007/AC:2008 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14677:2008
Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14678-1:2013
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14681:2006+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14756:2006
Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14797:2006
Explosion venting devices |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14973:2015
Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14983:2007
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14983:2024
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14986:2007
Design of fans working in potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14986:2017
Design of fans working in potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 14994:2007
Gas explosion venting protective systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15089:2009
Explosion isolation systems |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15188:2007
Determination of the spontaneous ignition behaviour of dust accumulations |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15188:2020
Determination of the spontaneous ignition behaviour of dust accumulations |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15198:2007
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15233:2007
Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15268:2008
Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15794:2009
Determination of explosion points of flammable liquids |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15967:2011
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 15967:2022
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 16009:2011
Flameless explosion venting devices |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 16020:2011
Explosion diverters |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 16447:2014
Explosion isolation flap valves |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 17077:2018
Determination of burning behaviour of dust layers |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN 17348:2022
Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50050-1:2013
Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50050-2:2013
Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50050-3:2013
Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50050:2006
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50104:2010
Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50104:2019
Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
EN 50104:2019/A1:2023 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50176:2009
Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50176:2025
Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50177:2009
Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
EN 50177:2009/A1:2012 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50223:2010
Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50223:2015
Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50271:2010
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50271:2018
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50281-2-1:1998
Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust
EN 50281-2-1:1998/AC:1999 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50303:2000
Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50381:2004
Transportable ventilated rooms with or without an internal source of release
EN 50381:2004/AC:2005 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 50495:2010
Safety devices required for the safe functioning of equipment with respect to explosion risks |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-0:2012
Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-0:2012/A11:2013 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-1:2007
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-1:2014
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-2:2007
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-2:2014
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-2:2014/AC:2015 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-5:2007
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-5:2015
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-6:2007
Explosive atmospheres - Part 6: Equipment protection by oil immersion "o" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-6:2015
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-7:2007
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-7:2015
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-7:2015
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN IEC 60079-7:2015/A1:2018 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-11:2012
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-15:2010
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-18:2009
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-18:2015
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-18:2015
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
EN 60079-18:2015/A1:2017 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-20-1:2010
Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-25:2010
Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN 60079-25:2010/AC:2013 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-26:2007
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-26:2015
Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-27:2008
Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-28:2007
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-28:2015
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-29-1:2007
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-29-1:2016
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-29-1:2016
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A1:2022
EN 60079-29-1:2016/A11:2022 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-29-4:2010
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-30-1:2007
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-30-1:2017
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-31:2009
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-31:2014
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 60079-35-1:2011
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
EN 60079-35-1:2011/AC:2011 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN 61241-4:2006
Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN IEC 60079-0:2018
Explosive atmospheres - Part 0: Equipment - General requirements |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN IEC 60079-28:2026
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN ISO/IEC 80079-20-2:2016
Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016)
EN ISO/IEC 80079-20-2:2016/AC:2017 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
Cenelec |
EN ISO/IEC 80079-34:2011
Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN ISO/IEC 80079-38:2016
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016/A1:2018 |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN ISO 16852:2010
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) |
|
2014/34/EU - Equipment explosive atmospheres (ATEX) |
CEN |
EN ISO 16852:2016
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
|
|
|
