意大利ECM认证机构MD指令下CE认证标准范围如下：
EN 81-3:2000+A1:2008
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
EN 81-3:2000+A1:2008/AC:2009
EN 81-30:2025
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 30: Electric and hydraulic service lifts
EN 81-31:2010
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 81-31:2024
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 81-40:2008
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
EN 81-40:2020
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
EN 81-41:2010
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 81-41:2024
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 81-42:2025
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 42: Vertical lifting appliances with enclosed carrier intended for use by persons, including persons with disability
EN 81-43:2009
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
EN 81-43:2025
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
EN 81-44:2024
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines
EN 115-1:2008
Safety of escalators and moving walks - Part 1: Construction and installation
EN 115-1:2008+A1:2010
Safety of escalators and moving walks - Part 1: Construction and installation
EN 115-1:2017
Safety of escalators and moving walks - Part 1: Construction and installation
EN 201:2009
Plastics and rubber machines - Injection moulding machines - Safety requirements
EN 267:2009
Automatic forced draught burners for liquid fuels
EN 267:2009+A1:2011
Automatic forced draught burners for liquid fuels
EN 280-1:2022
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 280-2:2022
Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
EN 280:2001+A2:2009
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 280:2013
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 280:2013+A1:2015
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 289:2004+A1:2008
Plastics and rubber machines - Presses - Safety requirements
EN 289:2014
Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
EN 303-5:2012
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 303-5:2021
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 303-5:2021+A1:2022
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 349:1993+A1:2008
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 378-2:2008+A1:2009
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 378-2:2008+A2:2012
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 378-2:2016
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 415-1:2000+A1:2009
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-1:2014
Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-2:2025
Safety of packaging machines - Part 2: Packaging machines for pre-formed rigid containers
EN 415-3:1999+A1:2009
Safety of packaging machines - Part 3: Form, fill and seal machines
EN 415-3:2021
Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines
EN 415-4:2025
Safety of packaging machines - Part 4: Palletizers and depalletizers and associated equipment
EN 415-5:2006+A1:2009
Safety of packaging machines - Part 5: Wrapping machines
EN 415-6:2006+A1:2009
Safety of packaging machines - Part 6: Pallet wrapping machines
EN 415-6:2013
Safety of packaging machines - Part 6: Pallet wrapping machines
EN 415-7:2006+A1:2008
Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 415-8:2008
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2025
Safety of packaging machines - Part 8: Strapping machines
EN 415-9:2009
Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
EN 415-10:2014
Safety of packaging machines - Part 10: General Requirements
EN 422:2009
Plastics and rubber machines - Blow moulding machines - Safety requirements
EN 453:2000+A1:2009
Food processing machinery - Dough mixers - Safety and hygiene requirements
EN 453:2014
Food processing machinery - Dough mixers - Safety and hygiene requirements
EN 454:2000+A1:2009
Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN 454:2014
Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN 474-1:2006+A1:2009
Earth-moving machinery - Safety - Part 1: General requirements
EN 474-1:2006+A4:2013
Earth-moving machinery - Safety - Part 1: General requirements
EN 474-1:2006+A4:2013/AC:2014
EN 474-1:2006+A4:2013
Earth-moving machinery - Safety - Part 1: General requirements
EN 474-1:2006+A4:2013/AC:2014
Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
EN 474-1:2006+A5:2018
Earth-moving machinery - Safety - Part 1: General requirements
Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
EN 474-1:2006+A6:2019
Earth-moving machinery - Safety - Part 1: General requirements
Notice: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators.
EN 474-1:2006+A6:2019
Earth-moving machinery - Safety - Part 1: General requirements
Restriction 1: This publication does not concern clause 5.8.1 Visibility-Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
Restriction 2: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.1.2 b), 1.1.2 c) and 1.3.3 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators.
EN 474-1:2022
Earth-moving machinery - Safety - Part 1: General requirements
EN 474-1:2022
Earth-moving machinery - Safety - Part 1: General requirements
Restriction: For the purpose of the presumption of conformity of this harmonised standard, the value in its clause 4.12.7.2 ‘at 125% of Q1 and Q2’ shall be read as ‘at least at 100% or up to a value of 125% of Q1 and Q2 insofar the tested machine can indeed attain a higher load’, as well as the value in its clause 4.12.7.3 ‘at 110% of Q1 and Q2’ shall be read as ‘at least at 100% or up to a value of 110% of Q1 and Q2 insofar the tested machine can indeed attain a higher load.
EN 474-2:2006+A1:2008
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
EN 474-2:2022
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
EN 474-3:2006+A1:2009
Earth-moving machinery - Safety - Part 3: Requirements for loaders
EN 474-3:2022
Earth-moving machinery - Safety - Part 3: Requirements for loaders
EN 474-3:2022/AC:2022
EN 474-4:2006+A2:2012
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
EN 474-4:2022
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
EN 474-5:2006+A1:2009+A2:2012
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN 474-5:2006+A3:2013
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN 474-5:2022
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN 474-5:2022/AC:2022
EN 474-6:2006+A1:2009
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
EN 474-6:2022
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
EN 474-7:2006+A1:2009
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
EN 474-7:2022
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
EN 474-8:2006+A1:2009
Earth-moving machinery - Safety - Part 8: Requirements for graders
EN 474-8:2022
Earth-moving machinery - Safety - Part 8: Requirements for graders
EN 474-9:2006+A1:2009
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
EN 474-9:2022
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
EN 474-10:2006+A1:2009
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
EN 474-10:2022
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
EN 474-11:2006+A1:2008
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors
EN 474-11:2022
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors
EN 474-12:2006+A1:2008
Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
EN 474-12:2022
Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
EN 474-13:2022
Earth-moving machinery - Safety - Part 13: Requirements for rollers
EN 500-1:2006+A1:2009
Mobile road construction machinery - Safety - Part 1: Common requirements
EN 500-2:2006+A1:2008
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
EN 500-3:2006+A1:2008
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
EN 500-4:2011
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
EN 500-6:2006+A1:2008
Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
EN 528:2008
Rail dependent storage and retrieval equipment - Safety requirements
EN 528:2021+A1:2022
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
EN 536:2015
Road construction machines - Mixing plants for road construction materials - Safety requirements
EN 547-1:1996+A1:2008
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 547-2:1996+A1:2008
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN 547-3:1996+A1:2008
Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN 574:1996+A1:2008
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 609-1:1999+A2:2009
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters
EN 609-1:2017
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters
EN 609-2:1999+A1:2009
Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters
EN 614-1:2006+A1:2009
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 614-2:2000+A1:2008
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN 617:2001+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
EN 618:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 619:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 619:2022
Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads
EN 620:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
EN 620:2021
Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials
EN 626-1:1994+A1:2008
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN 626-2:1996+A1:2008
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN 676:2003+A2:2008
Automatic forced draught burners for gaseous fuels
EN 676:2003+A2:2008/AC:2008
EN 690:1994+A1:2009
Agricultural machinery - Manure spreaders - Safety
EN 690:2013
Agricultural machinery - Manure spreaders - Safety
EN 692:2005+A1:2009
Machine tools - Mechanical presses - Safety
EN 693:2001+A1:2009
Machine tools - Safety - Hydraulic presses
EN 693:2001+A2:2011
Machine tools - Safety - Hydraulic presses
EN 703:2004+A1:2009
Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety
EN 703:2021
Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines
EN 704:1999+A1:2009
Agricultural machinery - Pick-up balers - Safety
EN 706:1996+A1:2009
Agricultural machinery - Vine shoot tipping machines - Safety
EN 707:1999+A1:2009
Agricultural machinery - Slurry tankers - Safety
EN 707:2018
Agricultural machinery - Slurry tankers - Safety
EN 709:1997+A2:2009
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
EN 709:1997+A4:2009
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
EN 709:1997+A4:2009/AC:2012
EN 710:1997+A1:2010
Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
EN 710:1997+A1:2010/AC:2012
EN 741:2000+A1:2010
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 745:1999+A1:2009
Agricultural machinery - Rotary mowers and flail-mowers - Safety
EN 746-1:1997+A1:2009
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-2:2010
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 746-3:1997+A1:2009
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 746-3:2021
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 786:1996+A2:2009
Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
EN 791:1995+A1:2009
Drill rigs - Safety
EN 792-1:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
EN 792-2:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
EN 792-3:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
EN 792-4:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
EN 792-5:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
EN 792-6:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
EN 792-7:2001+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
EN 792-8:2001+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
EN 792-9:2001+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
EN 792-10:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
EN 792-11:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
EN 792-12:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
EN 792-13:2000+A1:2008
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
EN 809:1998+A1:2009
Pumps and pump units for liquids - Common safety requirements
EN 809:1998+A1:2009/AC:2010
EN 815:1996+A2:2008
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
EN 818-1:1996+A1:2008
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
EN 818-2:1996+A1:2008
Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
EN 818-3:1999+A1:2008
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
EN 818-4:1996+A1:2008
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
EN 818-5:1999+A1:2008
Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
EN 818-6:2000+A1:2008
Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 818-7:2002+A1:2008
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
EN 836:1997+A4:2011
Garden equipment - Powered lawnmowers - Safety
EN 842:1996+A1:2008
Safety of machinery - Visual danger signals - General requirements, design and testing
EN 848-1:2007+A1:2009
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
EN 848-1:2007+A2:2012
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
EN 848-2:2007+A1:2009
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
EN 848-2:2007+A2:2012
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
EN 848-3:2007+A2:2009
Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines
EN 848-3:2012
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN 859:2007+A1:2009
Safety of woodworking machines - Hand fed surface planing machines
EN 859:2007+A2:2012
Safety of woodworking machines - Hand fed surface planing machines
EN 860:2007+A1:2009
Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A2:2012
Safety of woodworking machines - One side thickness planing machines
EN 861:2007+A1:2009
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007+A2:2012
Safety of woodworking machines - Surface planing and thicknessing machines
EN 869:2006+A1:2009
Safety of machinery - Safety requirements for pressure metal diecasting units
EN 894-1:1997+A1:2008
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
EN 894-2:1997+A1:2008
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 894-3:2000+A1:2008
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 894-4:2010
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
EN 908:1999+A1:2009
Agricultural and forestry machinery - Reel machines for irrigation - Safety
EN 909:1998+A1:2009
Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety
EN 930:1997+A2:2009
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
EN 931:1997+A2:2009
Footwear manufacturing machines - Lasting machines - Safety requirements
EN 940:2009
Safety of woodworking machines - Combined woodworking machines
EN 940:2009+A1:2012
Safety of woodworking machines - Combined woodworking machines
EN 953:1997+A1:2009
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 957-6:2010+A1:2014
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
EN 972:1998+A1:2010
Tannery machines - Reciprocating roller machines - Safety requirements
EN 972:1998+A1:2010/AC:2011
EN 981:1996+A1:2008
Safety of machinery - System of auditory and visual danger and information signals
EN 982:1996+A1:2008
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 983:1996+A1:2008
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 996:1995+A3:2009
Piling equipment - Safety requirements
EN 999:1998+A1:2008
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 1005-1:2001+A1:2008
Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 1005-3:2002+A1:2008
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 1005-4:2005+A1:2008
Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
EN 1010-1:2004+A1:2010
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 1010-2:2006+A1:2010
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 1010-3:2002+A1:2009
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
EN 1010-4:2004+A1:2009
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 1012-2:1996+A1:2009
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 1012-3:2013
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1028-1:2002+A1:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 1028-2:2002+A1:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
EN 1032:2003+A1:2008
Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
EN 1034-1:2000+A1:2010
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
EN 1034-2:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
EN 1034-3:1999+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
EN 1034-3:2011
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
EN 1034-4:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
EN 1034-4:2021
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
EN 1034-5:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
EN 1034-6:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
EN 1034-7:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
EN 1034-8:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
EN 1034-13:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
EN 1034-14:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
EN 1034-16:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines
EN 1034-17:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 1034-21:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
EN 1034-22:2005+A1:2009
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
EN 1034-26:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines
EN 1034-27:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
EN 1037:1995+A1:2008
Safety of machinery - Prevention of unexpected start-up
EN 1088:1995+A2:2008
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 1093-1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 1093-2:2006+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
EN 1093-3:2006+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
EN 1093-4:1996+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 1093-6:1998+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1093-7:1998+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 1093-8:1998+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
EN 1093-9:1998+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
EN 1093-11:2001+A1:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
EN 1114-1:2011
Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 1114-2:1998+A1:2008
Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 1114-3:2001+A1:2008
Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1114-3:2019
Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1127-1:2007
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1127-1:2011
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1127-1:2019
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1127-2:2002+A1:2008
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 1127-2:2014
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 1175-1:1998+A1:2010
Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
EN 1175-2:1998+A1:2010
Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 1175-3:1998+A1:2010
Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
EN 1175:2020
Safety of industrial trucks - Electrical/electronic requirements
EN 1175:2025
Safety of industrial trucks - Electrical/electronic requirements
EN 1218-1:1999+A1:2009
Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
EN 1218-2:2004+A1:2009
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
EN 1218-3:2001+A1:2009
Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 1218-4:2004+A2:2009
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 1218-5:2004+A1:2009
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
EN 1247:2004+A1:2010
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
EN 1248:2001+A1:2009
Foundry machinery - Safety requirements for abrasive blasting equipment
EN 1265:1999+A1:2008
Safety of machinery - Noise test code for foundry machines and equipment
EN 1299:1997+A1:2008
Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
EN 1374:2000+A1:2010
Agricultural machinery - Silos stationary unloaders for round silos - Safety
EN 1398:2009
Dock levellers - Safety requirements
EN 1417:1996+A1:2008
Plastics and rubber machines - Two roll mills - Safety requirements
EN 1417:1996+A1:2008/AC:2009
EN 1417:2014
Plastics and rubber machines - Two-roll mills - Safety requirements
EN 1417:2023
Plastics and rubber machines - Two-roll mills - Safety requirements
EN 1459-1:2017
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
EN 1459-1:2025
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
EN 1459-2:2015
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
EN 1459-2:2015+A1:2018
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
EN 1459-4:2020+A1:2025
Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
EN 1459-5:2020
Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
EN 1459-5:2020+A1:2025
Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
EN 1459:1998+A3:2012
Safety of industrial trucks - Self-propelled variable reach trucks
EN 1492-1:2000+A1:2008
Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 1492-2:2000+A1:2008
Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
EN 1492-4:2004+A1:2008
Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes
EN 1493:1998+A1:2008
Vehicle lifts
EN 1493:2010
Vehicle lifts
EN 1494:2000+A1:2008
Mobile or movable jacks and associated lifting equipment
EN 1495:1997+A2:2009
Lifting platforms - Mast climbing work platforms
EN 1495:1997+A2:2009/AC:2010
Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.
Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.
EN 1501-1:1998+A2:2009
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles
EN 1501-1:2011
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-1:2011+A1:2015
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-1:2021
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-2:2005+A1:2009
Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-2:2021
Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-3:2008
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
EN 1501-3:2021
Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
EN 1501-4:2007
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 1501-4:2023
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 1501-5:2011
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 1501-5:2021
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 1501-5:2021
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in: point 1.1.7. of Annex I to Directive 2006/42/EC, which requires that machinery is designed and constructed in such a way as to provide adequate means to ensure that the operator has good working conditions and is protected against any foreseeable hazards; point 1.2.1. of that Annex, which requires that safety and reliability of control systems apply in a coherent way to the whole of an assembly of machinery, notably in case of reasonably foreseeable human error during operation, so that this does not lead to hazardous situations; and point 1.5.11. of that Annex, which requires that all machinery must be designed and constructed in such a way that external radiation does not interfere with its operation.
EN 1526:1997+A1:2008
Safety of industrial trucks - Additional requirements for automated functions on trucks
EN 1539:2009
Dryers and ovens, in which flammable substances are released - Safety requirements
EN 1539:2015
Dryers and ovens, in which flammable substances are released - Safety requirements
EN 1547:2001+A1:2009
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
EN 1550:1997+A1:2008
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
EN 1554:2012
Conveyor belts - Drum friction testing
EN 1570-1:2011
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 1570-1:2011+A1:2014
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 1570-1:2024
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landing
EN 1570-2:2016
Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
EN 1570:1998+A2:2009
Safety requirements for lifting tables
EN 1612-1:1997+A1:2008
Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
EN 1612:2019
Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
EN 1672-2:2005+A1:2009
Food processing machinery - Basic concepts - Part 2: Hygiene requirements
EN 1673:2000+A1:2009
Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
EN 1674:2000+A1:2009
Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements
EN 1674:2015
Food processing machinery - Dough sheeters - Safety and hygiene requirements
EN 1677-1:2000+A1:2008
Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 1677-2:2000+A1:2008
Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
EN 1677-3:2001+A1:2008
Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8
EN 1677-4:2000+A1:2008
Components for slings - Safety - Part 4: Links, Grade 8
EN 1677-5:2001+A1:2008
Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN 1677-6:2001+A1:2008
Components for slings - Safety - Part 6: Links - Grade 4
EN 1678:1998+A1:2010
Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements
EN 1679-1:1998+A1:2011
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
EN 1710:2005+A1:2008
Equipment and components intended for use in potentially explosive atmospheres in underground mines
EN 1710:2005+A1:2008/AC:2010
EN 1755:2000+A1:2009
Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust
EN 1755:2000+A2:2013
Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust
EN 1756-1:2001+A1:2008
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
EN 1756-1:2021
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
EN 1756-2:2004+A1:2009
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
EN 1760-1:1997+A1:2009
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 1760-2:2001+A1:2009
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 1760-3:2004+A1:2009
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
EN 1777:2004+A1:2009
Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 1777:2010
Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 1804-1:2001+A1:2010
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
EN 1804-1:2020
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
EN 1804-2:2001+A1:2010
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
EN 1804-2:2020
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
EN 1804-3:2006+A1:2010
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
EN 1804-3:2020
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems
EN 1807-1:2013
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
EN 1807-2:2013
Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
EN 1807:1999+A1:2009
Safety of woodworking machines - Band sawing machines
EN 1808:1999+A1:2010
Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests
EN 1808:2015
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 1829-1:2010
High pressure water jet machines - Safety requirements - Part 1: Machines
EN 1829-1:2021
High-pressure water jet machines - Safety requirements - Part 1: Machines
EN 1829-2:2008
High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
EN 1829-2:2008/AC:2011
EN 1837:1999+A1:2009
Safety of machinery - Integral lighting of machines
EN 1837:2020
Safety of machinery - Integral lighting of machines
EN 1845:2007
Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 1846-2:2001+A3:2009
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
EN 1846-2:2009
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
EN 1846-2:2009+A1:2013
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
EN 1846-2:2024
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
EN 1846-3:2002+A1:2008
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
EN 1846-3:2013
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
EN 1853:1999+A1:2009
Agricultural machinery - Trailers with tipping body - Safety
EN 1853:2017
Agricultural machinery - Trailers - Safety
EN 1870-1:2007+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN 1870-3:2001+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-4:2001+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN 1870-4:2012
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN 1870-5:2002+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
EN 1870-5:2002+A2:2012
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
EN 1870-6:2002+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
EN 1870-6:2017
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 1870-7:2002+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 1870-7:2012
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 1870-8:2001+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1870-8:2012
Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1870-9:2000+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 1870-9:2012
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 1870-10:2003+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 1870-10:2013
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 1870-11:2003+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-11:2013
Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-12:2003+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN 1870-12:2013
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN 1870-13:2007+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN 1870-13:2007+A2:2012
Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN 1870-14:2007+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1870-14:2007+A2:2012
Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1870-15:2004+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1870-15:2012
Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1870-16:2005+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting
EN 1870-16:2012
Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
EN 1870-17:2007+A2:2009
Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
EN 1870-17:2012
Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
Warning: with regards to the choice of guards of the saw blade, this publication does not concern paragraphs 3 of clauses 5.3.6.1 of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.4.2 of Annex I to Directive 2006/42/EC.
EN 1870-17:2012+A1:2015
Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-18:2013
Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
EN 1870-19:2013
Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
EN 1889-1:2011
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
EN 1889-2:2003+A1:2009
Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
EN 1915-1:2001+A1:2009
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1915-1:2013
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1915-1:2023
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1915-2:2001+A1:2009
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
EN 1915-3:2004+A1:2009
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
EN 1915-4:2004+A1:2009
Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
EN 1953:1998+A1:2009
Atomising and spraying equipment for coating materials - Safety requirements
EN 1953:2013
Atomising and spraying equipment for coating materials - Safety requirements
EN 1953:2025
Application equipment for coating materials - Safety requirements
EN 1974:1998+A1:2009
Food processing machinery - Slicing machines - Safety and hygiene requirements
EN 1974:2020
Food processing machinery - Slicing machines - Safety and hygiene requirements
EN 12001:2003+A1:2009
Conveying, spraying and placing machines for concrete and mortar - Safety requirements
EN 12001:2012
Conveying, spraying and placing machines for concrete and mortar - Safety requirements
EN 12012-1:2007+A1:2008
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
EN 12012-1:2018
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders
EN 12012-2:2001+A2:2008
Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 12012-3:2001+A1:2008
Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 12012-4:2006+A1:2008
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 12012-4:2019+A1:2021
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 12013:2000+A1:2008
Plastics and rubber machines - Internal mixers - Safety requirements
EN 12013:2018
Plastics and rubber machines - Internal mixers - Safety requirements
EN 12016:2004+A1:2008
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 12016:2013
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 12041:2000+A1:2009
Food processing machinery - Moulders - Safety and hygiene requirements
EN 12041:2014
Food processing machinery - Moulders - Safety and hygiene requirements
EN 12042:2005+A1:2010
Food processing machinery - Automatic dividers - Safety and hygiene requirements
EN 12042:2014
Food processing machinery - Automatic dough dividers - Safety and hygiene requirements
EN 12043:2000+A1:2010
Food processing machinery - Intermediate provers - Safety and hygiene requirements
EN 12043:2014
Food processing machinery - Intermediate provers - Safety and hygiene requirements
EN 12044:2005+A1:2009
Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
EN 12053:2001+A1:2008
Safety of industrial trucks - Test methods for measuring noise emissions
EN 12077-2:1998+A1:2008
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
EN 12077-2:2024
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
EN 12110:2002+A1:2008
Tunnelling machines - Air locks - Safety requirements
EN 12110:2014
Tunnelling machines - Air locks - Safety requirements
EN 12111:2002+A1:2009
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
EN 12111:2014
Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 12158-1:2000+A1:2010
Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-1:2021
Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-2:2000+A1:2010
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
EN 12159:2000+A1:2009
Builders hoists for persons and materials with vertically guided cages
EN 12159:2012
Builders hoists for persons and materials with vertically guided cages
EN 12159:2024
Builders hoists for persons and materials with vertically guided cages
EN 12162:2001+A1:2009
Liquid pumps - Safety requirements - Procedure for hydrostatic testing
EN 12198-1:2000+A1:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
EN 12198-2:2002+A1:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
EN 12198-3:2002+A1:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN 12203:2003+A1:2009
Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 12254:1998+A2:2008
Screens for laser working places - Safety requirements and testing
EN 12254:2010
Screens for laser working places - Safety requirements and testing
EN 12254:2010/AC:2011
EN 12267:2003+A1:2010
Food processing machinery - Circular saw machines - Safety and hygiene requirements
EN 12268:2003+A1:2010
Food processing machinery - Band saw machines - Safety and hygiene requirements
EN 12268:2014
Food processing machinery - Band saw machines - Safety and hygiene requirements
EN 12301:2000+A1:2008
Plastics and rubber machines - Calenders - Safety requirements
EN 12301:2019
Plastics and rubber machines - Calenders - Safety requirements
EN 12301:2019
Plastics and rubber machines - Calenders - Safety requirements
EN 12301:2019/AC:2021
EN 12312-1:2001+A1:2009
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
EN 12312-1:2013
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
EN 12312-1:2024
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
EN 12312-2:2002+A1:2009
Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
EN 12312-2:2014
Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
EN 12312-3:2003+A1:2009
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
EN 12312-3:2017
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
EN 12312-3:2017+A1:2020
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
EN 12312-4:2003+A1:2009
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
EN 12312-4:2014
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
EN 12312-4:2024
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
EN 12312-5:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
EN 12312-5:2021
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
EN 12312-5:2021+A1:2025
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
EN 12312-6:2004+A1:2009
Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment
EN 12312-6:2017
Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
EN 12312-7:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment
EN 12312-7:2020
Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment
EN 12312-8:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms
EN 12312-8:2018
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms
EN 12312-9:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
Warning: This publication does not concern clause 5.6 of the standard, the application of which does not confer a presumption of conformity with the essential health and safety requirement 1.5.15 of Annex I to Directive 2006/42/EC, in conjunction with the requirement 1.1.2(b) of that Annex.
EN 12312-9:2013
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
EN 12312-10:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
EN 12312-12:2002+A1:2009
Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment
EN 12312-12:2017
Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment
EN 12312-13:2002+A1:2009
Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
EN 12312-13:2017
Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
EN 12312-14:2006+A1:2009
Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
EN 12312-14:2014
Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
EN 12312-15:2006+A1:2009
Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors
EN 12312-15:2020+A2:2025
Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors
EN 12312-16:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment
EN 12312-17:2004+A1:2009
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment
EN 12312-18:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units
EN 12312-19:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
EN 12312-20:2005+A1:2009
Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
EN 12321:2003+A1:2009
Underground mining machinery - Specification for the safety requirements of armoured face conveyors
EN 12331:2003+A2:2010
Food processing machinery - Mincing machines - Safety and hygiene requirements
EN 12331:2021
Food processing machinery - Mincing machines - Safety and hygiene requirements
EN 12336:2005+A1:2008
Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
EN 12348:2000+A1:2009
Core drilling machines on stand - Safety
EN 12355:2003+A1:2010
Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN 12355:2022
Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN 12385-1:2002+A1:2008
Steel wire ropes - Safety - Part 1: General requirements
EN 12385-2:2002+A1:2008
Steel wire ropes - Safety - Part 2: Definitions, designation and classification
EN 12385-3:2004+A1:2008
Steel wire ropes - Safety - Part 3: Information for use and maintenance
EN 12385-4:2002+A1:2008
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
EN 12385-5:2021
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts
EN 12385-5:2021
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts
EN 12385-5:2021/AC:2021
EN 12385-10:2003+A1:2008
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications
EN 12387:2005+A1:2009
Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
EN 12409:2008
Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 12409:2008+A1:2011
Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 12417:2001+A2:2009
Machine tools - Safety - Machining centres
EN 12417:2001+A2:2009/AC:2010
EN 12418:2000+A1:2009
Masonry and stone cutting-off machines for job site - Safety
EN 12418:2021
Masonry and stone cutting-off machines for job site - Safety
EN 12453:2017+A1:2021
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
EN 12463:2004+A1:2011
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
EN 12505:2000+A1:2009
Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements
EN 12525:2000+A2:2010
Agricultural machinery - Front loaders - Safety
EN 12525:2000+A2:2010
Agricultural machinery - Front loaders - Safety
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires technical measures, and not organisational ones such as protective structures specifically mitigating falling objects instead of addressing other accident scenarios including vehicle roll-over events, and point 1.7.4.2 (l) of Annex I to Directive 2006/42/EC, which requires information about the residual risks that remain despite the inherent safe design measures, safeguarding and complementary protective measures adopted.
EN 12545:2000+A1:2009
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
EN 12547:1999+A1:2009
Centrifuges - Common safety requirements
EN 12547:2014
Centrifuges - Common safety requirements
EN 12549:1999+A1:2008
Acoustics - Noise test code for fastener driving tools - Engineering method
EN 12581:2005+A1:2010
Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 12601:2010
Reciprocating internal combustion engine driven generating sets - Safety
EN 12609:2021
Truck mixers - Safety requirements
EN 12621:2006+A1:2010
Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 12621:2025
Machinery for supply and circulation of liquid coating materials - Safety requirements
EN 12622:2009
Safety of machine tools - Hydraulic press brakes
EN 12622:2009+A1:2013
Safety of machine tools - Hydraulic press brakes
EN 12629-1:2000+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements
EN 12629-2:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines
EN 12629-3:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines
EN 12629-4:2001+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines
EN 12629-5-1:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
EN 12629-5-2:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis
EN 12629-5-3:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
EN 12629-5-4:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines
EN 12629-6:2004+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
EN 12629-7:2004+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
EN 12629-8:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
EN 12635:2002+A1:2008
Industrial, commercial and garage doors and gates - Installation and use
EN 12635:2002+A1:2008
Industrial, commercial and garage doors and gates - Installation and use
Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC.
EN 12643:1997+A1:2008
Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
EN 12643:2014
Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
EN 12644-1:2001+A1:2008
Cranes - Information for use and testing - Part 1: Instructions
EN 12644-2:2000+A1:2008
Cranes - Information for use and testing - Part 2: Marking
EN 12649:2008
Concrete compactors and smoothing machines - Safety
EN 12649:2008+A1:2011
Concrete compactors and smoothing machines - Safety
EN 12653:1999+A2:2009
Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 12693:2008
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12693:2026
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12717:2001+A1:2009
Safety of machine tools - Drilling machines
EN 12733:2001+A1:2009
Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
EN 12733:2018
Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
EN 12750:2001+A1:2009
Safety of woodworking machines - Four-sided moulding machines
EN 12750:2013
Safety of woodworking machines - Four sided moulding machines
EN 12753:2005+A1:2010
Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 12757-1:2005+A1:2010
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 12779:2004+A1:2009
Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements
EN 12779:2015
Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 12786:2013
Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards
EN 12851:2005+A1:2010
Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements
EN 12852:2001+A1:2010
Food processing machinery - Food processors and blenders - Safety and hygiene requirements
EN 12853:2001+A1:2010
Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements
EN 12853:2001+A1:2010/AC:2010
EN 12854:2003+A1:2010
Food processing machinery - Beam mixers - Safety and hygiene requirements
EN 12855:2003+A1:2010
Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements
EN 12881-1:2005+A1:2008
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
EN 12881-1:2014
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
EN 12881-2:2005+A1:2008
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
EN 12882:2008
Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 12882:2015
Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 12921-1:2005+A1:2010
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12921-2:2005+A1:2008
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
EN 12921-3:2005+A1:2008
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
EN 12921-4:2005+A1:2008
Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
EN 12957:2001+A1:2009
Machine tools - Safety - Electro discharge machines
EN 12965:2003+A2:2009
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 12965:2019
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 12965:2019+A1:2025
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 12978:2003+A1:2009
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 12978:2024
Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods
EN 12981:2005+A1:2009
Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 12984:2005+A1:2010
Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
EN 12999:2011
Cranes - Loader cranes
EN 12999:2011+A1:2012
Cranes - Loader cranes
EN 12999:2011+A2:2018
Cranes - Loader cranes
EN 12999:2020
Cranes - Loader cranes
EN 12999:2020+A1:2025
Cranes - Loader cranes
EN 13000:2010
Cranes - Mobile cranes
EN 13000:2010/AC:2010
EN 13000:2010+A1:2014
Cranes - Mobile cranes
EN 13001-1:2004+A1:2009
Cranes - General design - Part 1: General principles and requirements
EN 13001-1:2004+A1:2009/AC:2009
EN 13001-1:2015
Cranes - General design - Part 1: General principles and requirements
EN 13001-2:2004+A3:2009
Crane safety - General design - Part 2: Load effects
EN 13001-2:2011
Crane safety - General design - Part 2: Load actions
EN 13001-2:2011/AC:2012
EN 13001-2:2014
Crane safety - General design - Part 2: Load actions
EN 13001-2:2021
Crane safety - General design - Part 2: Load actions
EN 13001-3-1:2012
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
EN 13001-3-1:2012+A1:2013
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
EN 13001-3-1:2012+A2:2018
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
EN 13001-3-1:2025
Cranes - General design - Part 3-1: Limit states and proof competence of steel structure
EN 13001-3-2:2014
Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 13001-3-3:2014
Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 13001-3-5:2016
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
EN 13001-3-5:2016+A1:2021
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
EN 13001-3-5:2025
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
EN 13001-3-6:2018
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
EN 13001-3-6:2018+A1:2021
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
EN 13015:2001+A1:2008
Maintenance for lifts and escalators - Rules for maintenance instructions
EN 13019:2001+A1:2008
Machines for road surface cleaning - Safety requirements
EN 13020:2004+A1:2010
Road surface treatment machines - Safety requirements
EN 13020:2015
Road surface treatment machines - Safety requirements
EN 13021:2003+A1:2008
Winter service machines - Safety requirements
EN 13023:2003+A1:2010
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN 13035-1:2008
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN 13035-2:2008
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
EN 13035-3:2003+A1:2009
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
EN 13035-3:2003+A1:2009/AC:2010
EN 13035-4:2003+A1:2009
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
EN 13035-5:2006+A1:2009
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
EN 13035-6:2006+A1:2009
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
EN 13035-7:2006+A1:2009
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
EN 13035-9:2006+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
EN 13035-11:2006+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
EN 13042-1:2007+A1:2009
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
EN 13042-2:2004+A1:2009
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding
EN 13042-3:2007+A1:2009
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 13042-5:2003+A1:2009
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
EN 13059:2002+A1:2008
Safety of industrial trucks - Test methods for measuring vibration
EN 13102:2005+A1:2008
Ceramic machines - Safety - Loading and unloading of fine clay tiles
EN 13112:2002+A1:2009
Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 13113:2002+A1:2010
Tannery machines - Roller coating machines - Safety requirements
EN 13114:2002+A1:2009
Tannery machines - Rotating process vessels - Safety requirements
EN 13118:2000+A1:2009
Agricultural machinery - Potato harvesting equipment - Safety
EN 13120:2009
Internal blinds - Performance requirements including safety
EN 13120:2009+A1:2014
Internal blinds - Performance requirements including safety
EN 13120:2009+A1:2014/AC:2015
EN 13128:2001+A2:2009
Safety of machine tools - Milling machines (including boring machines)
EN 13128:2001+A2:2009/AC:2010
EN 13135-1:2003+A1:2010
Cranes - Equipment - Part 1: Electrotechnical equipment
EN 13135-2:2004+A1:2010
Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 13135:2013
Cranes - Safety - Design - Requirements for equipment
EN 13135:2013+A1:2018
Cranes - Safety - Design - Requirements for equipment
EN 13140:2000+A1:2009
Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety
EN 13155:2003+A2:2009
Cranes - Safety - Non-fixed load lifting attachments
EN 13155:2020+A1:2025
Crane - Safety - Non-fixed load lifting attachments
EN 13155:2020+A1:2025
Crane - Safety - Non-fixed load lifting attachments
EN 13155:2020+A1:2025/AC:2026
EN 13157:2004+A1:2009
Cranes - Safety - Hand powered cranes
EN 13204:2004+A1:2012
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
EN 13204:2016
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
EN 13204:2025
Powered rescue tools for fire and rescue service use - Safety and performance requirements
EN 13208:2003+A1:2010
Food processing machinery - Vegetable peelers - Safety and hygiene requirements
EN 13218:2002+A1:2008
Machine tools - Safety - Stationary grinding machines
EN 13241-1:2003+A1:2011
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
EN 13241-1:2003+A1:2011
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Warning: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC.
EN 13241:2003+A2:2016
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
EN 13241:2003+A2:2016
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
Restriction: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC.
EN 13288:2005+A1:2009
Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 13288:2025
Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 13289:2001+A1:2013
Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN 13355:2004+A1:2009
Coating plants - Combined booths - Safety requirements
EN 13367:2005+A1:2008
Ceramic machines - Safety - Transfer platforms and cars
EN 13367:2005+A1:2008/AC:2009
EN 13378:2001+A1:2013
Pasta processing plants - Pasta presses - Safety and hygiene requirements
EN 13379:2001+A1:2013
Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
EN 13389:2005+A1:2009
Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
EN 13390:2002+A1:2009
Food processing machinery - Pie and tart machines - Safety and hygiene requirements
EN 13411-1:2002+A1:2008
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
EN 13411-2:2001+A1:2008
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
EN 13411-3:2004+A1:2008
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN 13411-4:2002+A1:2008
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-4:2011
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-5:2003+A1:2008
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
EN 13411-6:2004+A1:2008
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 13411-7:2006+A1:2008
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
EN 13411-8:2011
Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging
EN 13414-1:2003+A2:2008
Steel wire rope slings - Safety - Part 1: Slings for general lifting service
EN 13414-2:2003+A2:2008
Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-3:2003+A1:2008
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings
EN 13418:2004+A1:2008
Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
EN 13418:2013
Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
EN 13448:2001+A1:2009
Agricultural and forestry machinery - Inter-row mowing units - Safety
EN 13457:2004+A1:2010
Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
EN 13478:2001+A1:2008
Safety of machinery - Fire prevention and protection
EN 13490:2001+A1:2008
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
EN 13524:2003+A1:2009
Highway maintenance machines - Safety requirements
EN 13524:2003+A2:2014
Highway maintenance machines - Safety requirements
EN 13525:2005+A2:2009
Forestry machinery - Wood chippers - Safety
EN 13525:2020
Forestry machinery - Wood chippers - Safety
EN 13531:2001+A1:2008
Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
EN 13534:2006+A1:2010
Food processing machinery - Curing injection machines - Safety and hygiene requirements
EN 13557:2003+A2:2008
Cranes - Controls and control stations
EN 13557:2024
Cranes - Control devices and control stations
EN 13561:2004+A1:2008
External blinds - Performance requirements including safety
EN 13561:2015
External blinds and awnings - Performance requirements including safety
EN 13561:2015/AC:2016
EN 13570:2005+A1:2010
Food processing machinery - Mixing machines - Safety and hygiene requirements
EN 13586:2004+A1:2008
Cranes - Access
EN 13586:2020
Cranes - Access
EN 13591:2005+A1:2009
Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
EN 13617-1:2004+A1:2009
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 13617-1:2012
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 13617-1:2021
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 13621:2004+A1:2010
Food processing machinery - Salad dryers - Safety and hygiene requirements
EN 13659:2004+A1:2008
Shutters - Performance requirements including safety
EN 13659:2015
Shutters and external venetian blinds - Performance requirements including safety
EN 13675:2004+A1:2010
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
EN 13683:2003+A1:2009
Garden equipment - Integrally powered shredders/chippers - Safety
EN 13683:2003+A2:2011
Garden equipment - Integrally powered shredders/chippers - Safety
EN 13683:2003+A2:2011/AC:2013
EN 13684:2004+A2:2009
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
EN 13684:2004+A3:2009
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
EN 13684:2018
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
EN 13684:2018+A1:2024
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
EN 13731:2007
Lifting bag systems for fire and rescue service use - Safety and performance requirements
EN 13732:2002+A2:2009
Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene
EN 13732:2013
Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
EN 13732:2022
Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
EN 13736:2003+A1:2009
Safety of machine tools - Pneumatic presses
EN 13852-1:2013
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 13852-1:2025
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 13852-3:2021
Cranes - Offshore cranes - Part 3: Light offshore cranes
EN 13862:2001+A1:2009
Floor cutting-off machines - Safety
EN 13862:2021
Floor cutting-off machines - Safety
EN 13870:2005+A1:2010
Food processing machinery - Chop cutting machines - Safety and hygiene requirements
EN 13870:2015
Food processing machinery - Portion cutting machines - Safety and hygiene requirements
EN 13870:2015+A1:2021
Food processing machinery - Portion cutting machines - Safety and hygiene requirements
EN 13871:2005+A1:2010
Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
EN 13871:2014
Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
EN 13885:2005+A1:2010
Food processing machinery - Clipping machines - Safety and hygiene requirements
EN 13885:2022
Food processing machinery - Clipping machines - Safety and hygiene requirements
EN 13886:2005+A1:2010
Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
EN 13889:2003+A1:2008
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN 13898:2003+A1:2009
Machine tools - Safety - Sawing machines for cold metal
EN 13898:2003+A1:2009/AC:2010
EN 13951:2003+A1:2008
Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use
EN 13951:2012
Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
EN 13954:2005+A1:2010
Food processing machinery - Bread slicers - Safety and hygiene requirements
EN 13977:2011
Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
EN 13985:2003+A1:2009
Machine tools - Safety - Guillotine shears
EN 14010:2003+A1:2009
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 14017:2005+A1:2008
Agricultural and forestry machinery - Solid fertilizer distributors - Safety
EN 14017:2005+A2:2009
Agricultural and forestry machinery - Solid fertilizer distributors - Safety
EN 14018:2005+A1:2009
Agricultural and forestry machinery - Seed drills - Safety
EN 14033-3:2009
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 14033-3:2009+A1:2011
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 14033-3:2017
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 14033-4:2019
Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail
EN 14043:2005+A1:2009
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14043:2014
High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14044:2005+A1:2009
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 14044:2014
High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 14070:2003+A1:2009
Safety of machine tools - Transfer and special-purpose machines
EN 14070:2003+A1:2009/AC:2010
EN 14238:2004+A1:2009
Cranes - Manually controlled load manipulating devices
EN 14439:2006+A2:2009
Cranes - Safety - Tower cranes
EN 14439:2025
Cranes - Tower cranes
EN 14439:2025
Cranes - Tower cranes
EN 14439:2025/AC:2026
EN 14462:2005+A1:2009
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
EN 14466:2005+A1:2008
Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
EN 14492-1:2006+A1:2009
Cranes - Power driven winches and hoists - Part 1: Power driven winches
EN 14492-1:2006+A1:2009/AC:2010
EN 14492-2:2006+A1:2009
Cranes - Power driven winches and hoists - Part 2: Power driven hoists
EN 14492-2:2006+A1:2009/AC:2010
EN 14502-2:2005+A1:2008
Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
EN 14655:2005+A1:2010
Food processing machinery - Baguette slicers - Safety and hygiene requirements
EN 14656:2006+A1:2010
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
EN 14658:2005+A1:2010
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
EN 14673:2006+A1:2010
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
EN 14677:2008
Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 14681:2006+A1:2010
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 14710-1:2005+A2:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
EN 14710-2:2005+A2:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements
EN 14753:2007
Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 14861:2004+A1:2009
Forest machinery - Self propelled machinery - Safety requirements
EN 14886:2008
Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
EN 14910:2007+A1:2009
Garden equipment - Walk-behind combustion engine powered trimmers - Safety
EN 14930:2007+A1:2009
Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces
EN 14957:2006+A1:2010
Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements
EN 14958:2006+A1:2009
Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements
EN 14973:2006+A1:2008
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
EN 14973:2015
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
EN 14985:2012
Cranes - Slewing jib cranes
EN 15000:2008
Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
EN 15011:2011
Cranes - Bridge and gantry cranes
EN 15011:2011+A1:2014
Cranes - Bridge and gantry cranes
EN 15011:2020
Cranes - Bridge and gantry cranes
EN 15027:2007+A1:2009
Transportable wall saw and wire saw equipment for job site - Safety
EN 15056:2006+A1:2009
Cranes - Requirements for container handling spreaders
EN 15059:2009
Snow grooming equipment - Safety requirements
EN 15059:2009+A1:2015
Snow grooming equipment - Safety requirements
EN 15061:2007+A1:2008
Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 15067:2007
Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 15093:2008
Safety of Machinery - Safety requirements for hot flat rolling mills
EN 15094:2008
Safety of Machinery - Safety requirements for cold flat rolling mills
EN 15095:2007+A1:2008
Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
EN 15162:2008
Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
EN 15163-1:2022
Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws
EN 15163-2:2022
Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws
EN 15163:2008
Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
EN 15164:2008
Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
EN 15166:2008
Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
EN 15180:2025
Food processing machinery - Food depositors - Safety and hygiene requirements
EN 15194:2017
Cycles - Electrically power assisted cycles - EPAC Bicycles
EN 15194:2017
Cycles - Electrically power assisted cycles - EPAC Bicycles
Restriction 1: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.5, 1.5.6 and 1.5.7 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks associated with extreme temperatures, fire and explosion.
Restriction 2: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery.
EN 15194:2017+A1:2023
Cycles - Electrically power assisted cycles - EPAC Bicycles
Restriction: Harmonised standard EN 15194:2017+A1:2023 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery.
EN 15268:2008
Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
EN 15503:2009
Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
EN 15503:2009+A1:2013
Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
EN 15503:2009+A2:2015
Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
EN 15571:2020
Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines
EN 15572:2015
Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
EN 15695-1:2009
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures
EN 15695-1:2017
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures
EN 15695-2:2009
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
EN 15695-2:2017
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
EN 15700:2011
Safety for conveyor belts for winter sport or leisure use
EN 15700:2023
Safety for conveyor belts for winter sport or tourist use
Restriction: With regard to paragraph 7.3 of this harmonised standard, compliance with this harmonised standard does not confer a presumption of conformity to the essential health and safety requirement 1.7.4.2. (u) of Annex I to Directive 2006/42/EC.
EN 15746-2:2010
Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 15746-2:2010+A1:2011
Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 15774:2010
Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
EN 15811:2009
Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified)
EN 15811:2014
Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)
EN 15830:2012
Rough-terrain variable reach trucks - Visibility - Test methods and verification
EN 15861:2012
Food processing machinery - Smokehouses - Safety and hygiene requirements
EN 15895:2011
Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
EN 15895:2011+A1:2018
Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
EN 15895:2025
Powder actuated hand-held fixing and hard marking tools - Safety requirements
EN 15949:2012
Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 15954-2:2013
Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 15955-2:2013
Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 15955-2:2025
Railway applications - Infrastructure - Demountable machines, trailers and associated equipment - Part 2: General safety requirements
EN 15967:2011
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
EN 15967:2022
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
EN 15997:2011
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
EN 15997:2011/AC:2012
EN 15997:2011
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
EN 15997:2011/AC:2012
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires compliance with the principles of safety integration and reasonably foreseeable misuse of the vehicle, point 1.3.1. of Annex I to Directive 2006/42/EC, which requires lateral and longitudinal stability mitigation, and point 3.4.1. of Annex I to Directive 2006/42/EC, which requires prevention of uncontrolled movement.
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires compliance with the principles of safety integration and reasonably foreseeable misuse of the vehicle, point 1.3.1. of Annex I to Directive 2006/42/EC, which requires lateral and longitudinal stability mitigation, and point 3.4.1. of Annex I to Directive 2006/42/EC, which requires prevention of uncontrolled movement.
EN 16005:2012
Power operated pedestrian doorsets - Safety in use - Requirements and test methods
EN 16005:2012/AC:2015
EN 16005:2023+A1:2024
Power operated pedestrian doorsets - Safety in use - Requirements and test methods
EN 16029:2012
Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods
EN 16191:2014
Tunnelling machinery - Safety requirements
EN 16203:2014
Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
EN 16228-1:2014
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-1:2014+A1:2021
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-2:2014
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014+A1:2021
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-3:2014
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014+A1:2021
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-4:2014
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN 16228-4:2014+A1:2021
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN 16228-5:2014
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
EN 16228-5:2014+A1:2021
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
EN 16228-6:2014
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
EN 16228-6:2014+A1:2021
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
EN 16228-7:2014
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
EN 16228-7:2014+A1:2021
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
EN 16230-1:2013
Leisure karts - Part 1: Safety requirements and test methods for karts
EN 16230-1:2013+A1:2014
Leisure karts - Part 1: Safety requirements and test methods for karts
EN 16246:2012
Agricultural machinery - Backhoes - Safety
EN 16252:2012
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
EN 16307-1:2013
Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN 16307-1:2013+A1:2015
Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN 16307-1:2020
Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN 16307-5:2013
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
EN 16307-5:2023
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
EN 16307-6:2014
Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers
EN 16327:2014
Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN 16474:2015
Plastics and rubber machines - Tyre curing machines - Safety requirements
EN 16474:2025
Plastics and rubber machines - Tyre curing machines - Safety requirements
EN 16486:2014
Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
EN 16486:2014+A1:2020
Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
EN 16500:2014
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
EN 16517:2021
Agricultural and forestry machinery - Mobile yarders for timber logging - Safety
EN 16564:2020
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
EN 16590-1:2014
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified)
EN 16590-2:2014
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
EN 16590-3:2014
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)
EN 16590-4:2014
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)
EN 16712-4:2018
Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16
EN 16719:2018
Transport platforms
EN 16743:2016
Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
EN 16770:2018
Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements
EN 16774:2016
Safety of machinery - Safety requirements for steel converter and associated equipment
EN 16808:2020
Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators
EN 16851:2017
Cranes - Light crane systems
EN 16851:2017+A1:2020
Cranes - Light crane systems
EN 16952:2018
Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety
EN 16952:2018+A1:2021
Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety
EN 16985:2018
Spray booths for organic coating material - Safety requirements
EN 17003:2021
Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements
EN 17059:2018
Plating and anodizing lines - Safety requirements
EN 17067:2018
Forestry machinery - Safety requirements on radio remote controls
EN 17076:2020+A1:2025
Tower cranes - Anti-collision systems - Safety requirements
EN 17088:2021
Side curtain ventilation systems - Safety
EN 17106-1:2021
Road operation machinery - Safety - Part 1: General requirements
EN 17106-2:2021
Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines
EN 17106-3-1:2021
Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs
EN 17106-3-2:2021
Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines
EN 17106-4:2021
Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines
EN 17281:2021
Safety requirements - Vehicle cleaning equipment
EN 17348:2022
Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres
EN 17352:2022
Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
EN 17624:2022
Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air
EN 17639:2025
Safety of machinery - Cableway installations designed for the transport of material and specially designated persons - General safety requirements
EN 17657:2025
Equipments for slaughterhouses - Slaughtering traps for bovine animals - Safety and cleaning requirements
EN 17677:2024
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
EN 17744:2025
Agricultural and forestry machinery - Environmental requirements for dusters
EN 17745:2025
Agricultural and forestry machinery - Environmental requirements for granule applicator of Plant Protection Products
EN 17923:2025
Equipment for vine cultivation and wine making - Safety - Must and grape harvest pumps
EN 17942:2024
Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment
EN 17969
Earth-moving machinery - Safety - Contamination protective systems
EN 30326-1:1994
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)
EN 30326-1:1994/A1:2007
EN 30326-1:1994
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)
EN 30326-1:1994/A1:2007
EN 30326-1:1994/A2:2011
EN 50059:2025
Hand-held electrostatic application equipment for non-ignitable liquid coating materials - Safety requirements
EN 50176:2025
Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements
EN 50223:2010
Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 50223:2015
Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 50348:2010
Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements
EN 50348:2010/AC:2010
EN 50374:2025
Conductor cars
EN 50374:2025/A1:2025
EN 50434:2014
Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers
EN 50434:2014
Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers
Restriction: This harmonised standard does not confer a presumption of conformity, limited to machines where the shredding means can rotate at speeds exceeding 300 r•min-1, with the essential health and safety requirements set out in point 1.1.2. (a) of Annex I to Directive 2006/42/EC, which requires that machinery must be designed and constructed so that it is fitted for its function, and can be operated without putting persons at risk when these operations are carried out under the conditions foreseen, but also taking into account any reasonably foreseeable misuse thereof, as well as point 1.3.3. of Annex I to Directive 2006/42/EC, as regards precautions that must be taken to prevent risks from ejected objects, which shall also consider long objects such as tall trees.
EN 50569:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
EN 50569:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
EN 50569:2013/A1:2018
EN 50570:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
EN 50570:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
EN 50570:2013/A1:2018
EN 50571:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
EN 50571:2013
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
EN 50571:2013/A1:2018
EN 50580:2012
Safety of hand-held electric motor operated tools - Particular requirements for spray guns
EN 50580:2012
Safety of hand-held electric motor operated tools - Particular requirements for spray guns
EN 50580:2012/A1:2013
EN 50636-2-91:2014
Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
EN 50636-2-92:2014
Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
EN 50636-2-94:2014
Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
EN 50636-2-100:2014
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
EN 50636-2-107:2015
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
EN 50636-2-107:2015
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
EN 50636-2-107:2015/A1:2018
EN 50636-2-107:2015
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
EN 50636-2-107:2015/A1:2018
EN 50636-2-107:2015/A2:2020
EN 50636-2-107:2015
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
EN 50636-2-107:2015/A1:2018
EN 50636-2-107:2015/A2:2020
EN 50636-2-107:2015/A3:2021
EN 60204-1:2006
Safety of machinery - Electrical equipment of machines -- Part 1: General requirements
EN 60204-1:2006/AC:2010
EN 60204-1:2006/A1:2009
EN 60204-1:2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 60204-11:2000
Safety of machinery - Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
EN 60204-11:2000/AC:2010
EN 60204-31:2013
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
EN 60204-32:2008
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 60204-33:2011
Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 60335-1:2002
Household and similar electrical appliances - Safety -- Part 1: General requirements
EN 60335-1:2002/AC:2009
EN 60335-1:2002/AC:2010
EN 60335-1:2002/A11:2004
EN 60335-1:2002/A1:2004
EN 60335-1:2002/A12:2006
EN 60335-1:2002/A1:2004/AC:2007
EN 60335-1:2002/A12:2006/AC:2007
EN 60335-1:2002/A13:2008
EN 60335-1:2002/A14:2010
EN 60335-1:2002
Household and similar electrical appliances - Safety -- Part 1: General requirements
EN 60335-1:2002/AC:2009
EN 60335-1:2002/AC:2010
EN 60335-1:2002/A11:2004
EN 60335-1:2002/A1:2004
EN 60335-1:2002/A12:2006
EN 60335-1:2002/A1:2004/AC:2007
EN 60335-1:2002/A12:2006/AC:2007
EN 60335-1:2002/A13:2008
EN 60335-1:2002/A14:2010
EN 60335-1:2002/A15:2011
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60335-1:2012/AC:2014
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
EN 60335-1:2012/A13:2017
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
EN 60335-1:2012/A13:2017
EN 60335-1:2012/A15:2021
EN 60335-2-8:2015
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
EN 60335-2-8:2015
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
EN 60335-2-8:2015/A1:2016
EN 60335-2-23:2003
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
EN 60335-2-23:2003/A2:2015
EN 60335-2-36:2002
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
EN 60335-2-36:2002/AC:2007
EN 60335-2-36:2002/A11:2012
EN 60335-2-37:2002
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
EN 60335-2-37:2002/AC:2007
EN 60335-2-37:2002/A11:2012
EN 60335-2-37:2002
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
EN 60335-2-37:2002/AC:2007
EN 60335-2-37:2002/A11:2012
EN 60335-2-37:2002/A12:2016
EN 60335-2-38:2003
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
EN 60335-2-38:2003/corrigendum Aug. 2007
EN 60335-2-38:2003/A1:2008
EN 60335-2-38:2003/A2:2024
EN 60335-2-38:2003/A11:2024
EN 60335-2-40:2003
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 60335-2-40:2003/A11:2004
EN 60335-2-40:2003/A12:2005
EN 60335-2-40:2003/A1:2006
EN 60335-2-40:2003/AC:2006
EN 60335-2-40:2003/A2:2009
EN 60335-2-40:2003/AC:2010
EN 60335-2-40:2003/A13:2012
EN 60335-2-40:2003/A13:2012/AC:2013
EN 60335-2-42:2003
Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
EN 60335-2-42:2003/AC:2007
EN 60335-2-42:2003/A11:2012
EN 60335-2-47:2003
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
EN 60335-2-47:2003/AC:2007
EN 60335-2-47:2003/A11:2012
EN 60335-2-48:2003
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
EN 60335-2-48:2003/AC:2007
EN 60335-2-48:2003/A11:2012
EN 60335-2-49:2003
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
EN 60335-2-49:2003/AC:2007
EN 60335-2-49:2003/A11:2012
EN 60335-2-58:2005
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
EN 60335-2-58:2005/A2:2015
EN 60335-2-58:2005/A12:2016
EN 60335-2-65:2003
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
EN 60335-2-65:2003/A11:2012
EN 60335-2-67:2009
Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use
EN 60335-2-67:2012
Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
EN 60335-2-68:2009
Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use
EN 60335-2-68:2012
Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
EN 60335-2-69:2009
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
EN 60335-2-69:2012
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
EN 60335-2-72:2009
Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use
EN 60335-2-72:2012
Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
EN 60335-2-77:2010
Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
EN 60335-2-79:2009
Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
EN 60335-2-79:2012
Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
EN 60335-2-89:2010
Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60335-2-89:2010/A1:2016
EN 60335-2-89:2010
Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60335-2-89:2010/A1:2016
EN 60335-2-89:2010/A2:2017
EN 60335-2-95:2015
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
EN 60335-2-95:2015/A1:2015
EN 60335-2-97:2006
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
EN 60335-2-97:2006/A12:2015
EN 60335-2-102:2016
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60335-2-103:2015
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
EN 60519-1:2015
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 60745-1:2009
Hand-held motor-operated electric tools - Safety - Part 1: General requirements
EN 60745-1:2009/AC:2009
EN 60745-1:2009
Hand-held motor-operated electric tools - Safety - Part 1: General requirements
EN 60745-1:2009/AC:2009
EN 60745-1:2009/A11:2010
EN 60745-2-1:2010
Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
EN 60745-2-2:2010
Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
EN 60745-2-3:2011
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011/A2:2013
EN 60745-2-3:2011
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011/A2:2013
EN 60745-2-3:2011/A11:2014
EN 60745-2-3:2011
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011/A2:2013
EN 60745-2-3:2011/A11:2014
EN 60745-2-3:2011/A12:2014
EN 60745-2-3:2011
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-3:2011/A2:2013
EN 60745-2-3:2011/A11:2014
EN 60745-2-3:2011/A12:2014
EN 60745-2-3:2011/A13:2015
EN 60745-2-4:2009
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
EN 60745-2-4:2009
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
EN 60745-2-4:2009/A11:2011
EN 60745-2-5:2010
Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
EN 60745-2-6:2010
Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
EN 60745-2-8:2009
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
EN 60745-2-9:2009
Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
EN 60745-2-11:2010
Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
EN 60745-2-12:2009
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
EN 60745-2-13:2009
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
EN 60745-2-13:2009
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
EN 60745-2-13:2009/A1:2010
EN 60745-2-14:2009
Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
EN 60745-2-14:2009
Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
EN 60745-2-14:2009/A2:2010
EN 60745-2-15:2009
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
EN 60745-2-15:2009
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
EN 60745-2-15:2009/A1:2010
EN 60745-2-16:2010
Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers
EN 60745-2-17:2010
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
EN 60745-2-18:2009
Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
EN 60745-2-19:2009
Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
EN 60745-2-19:2009
Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
EN 60745-2-19:2009/A1:2010
EN 60745-2-20:2009
Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
EN 60745-2-21:2009
Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
EN 60745-2-21:2009
Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
EN 60745-2-21:2009/A1:2010
EN 60745-2-22:2011
Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines
EN 60745-2-22:2011
Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines
EN 60745-2-22:2011/A11:2013
EN 60745-2-23:2013
Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
EN 60947-5-3:2013
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
EN 60947-5-5:1997
Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997/A1:2005
EN 60947-5-5:1997/A11:2013
EN 60947-5-5:1997
Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997/A1:2005
EN 60947-5-5:1997/A11:2013
EN 60947-5-5:1997/A2:2017
EN 61029-1:2009
Safety of transportable motor-operated electric tools - Part 1: General requirements
EN 61029-1:2009
Safety of transportable motor-operated electric tools - Part 1: General requirements
EN 61029-1:2009/AC:2009
EN 61029-1:2009/A11:2010
EN 61029-2-1:2010
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
EN 61029-2-1:2012
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
EN 61029-2-3:2011
Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers
EN 61029-2-4:2011
Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
EN 61029-2-5:2011
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
EN 61029-2-5:2011/A11:2015
EN 61029-2-6:2010
Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply
EN 61029-2-8:2010
Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders
EN 61029-2-9:2009
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
EN 61029-2-9:2012
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
EN 61029-2-9:2012
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
EN 61029-2-9:2012/A11:2013
EN 61029-2-10:2010
Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
EN 61029-2-10:2010
Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
EN 61029-2-10:2010/A11:2013
EN 61029-2-11:2009
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
EN 61029-2-11:2012
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
EN 61029-2-11:2012
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
EN 61029-2-11:2012/A11:2013
EN 61029-2-12:2011
Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines
EN 61310-1:2008
Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
EN 61310-2:2008
Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking
EN 61310-3:2008
Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
EN 61496-1:2004
Safety of machinery - Electro-sensitive protective equipment -- Part 1: General requirements and tests
EN 61496-1:2004/AC:2010
EN 61496-1:2004/A1:2008
EN 61496-1:2013
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN 61800-5-2:2007
Adjustable speed electrical power drive systems -- Part 5-2: Safety requirements - Functional
EN 62061:2005
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 62061:2005/AC:2010
EN 62061:2005
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 62061:2005/AC:2010
EN 62061:2005/A1:2013
EN 62061:2005
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 62061:2005/AC:2010
EN 62061:2005/A1:2013
EN 62061:2005/A2:2015
EN 62745:2017
Safety of machinery - Requirements for cableless control systems of machinery
EN 62745:2017/A11:2020
EN 62841-1:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
EN 62841-1:2015/AC:2015
EN 62841-1:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
EN 62841-1:2015/AC:2015
EN 62841-1:2015/A11:2022
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.
EN 62841-1:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
EN 62841-1:2015/AC:2015
EN 62841-1:2015/A11:2022
EN 62841-2-1:2018
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A11:2019
EN 62841-2-1:2018
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A11:2019
EN 62841-2-1:2018/A1:2022
EN 62841-2-1:2018/A12:2022
EN 62841-2-2:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified)
EN 62841-2-2:2014/AC:2015
EN 62841-2-4:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)
EN 62841-2-4:2014/AC:2015
EN 62841-2-5:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified)
EN 62841-2-8:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers
EN 62841-2-9:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
EN 62841-2-9:2015/AC:2016-10
EN 62841-2-10:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers
EN 62841-2-11:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-11:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-11:2016/A1:2020
EN 62841-2-11:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-11:2016/A1:2020
Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause.
EN 62841-2-11:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-11:2016/A1:2020
EN 62841-2-11:2016/A11:2024
EN 62841-2-14:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
EN 62841-2-17:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers
EN 62841-2-21:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners
EN 62841-3-1:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
EN 62841-3-1:2014/AC:2015
EN 62841-3-1:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
EN 62841-3-1:2014/AC:2015
EN 62841-3-1:2014/A11:2017
EN 62841-3-1:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)
EN 62841-3-1:2014/AC:2015
EN 62841-3-1:2014/A11:2017
EN 62841-3-1:2014/A1:2021
EN 62841-3-1:2014/A12:2021
EN 62841-3-4:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
EN 62841-3-4:2016/A11:2017
EN 62841-3-4:2016
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
EN 62841-3-4:2016/A11:2017
EN 62841-3-4:2016/A1:2020
EN 62841-3-4:2016/A12:2020
EN 62841-3-6:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)
EN 62841-3-6:2014/AC:2015
EN 62841-3-6:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)
EN 62841-3-6:2014/AC:2015
EN 62841-3-6:2014/A11:2017
EN 62841-3-6:2014
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)
EN 62841-3-6:2014/AC:2015
EN 62841-3-6:2014/A11:2017
EN 62841-3-6:2014/A1:2022
EN 62841-3-6:2014/A12:2022
EN 62841-3-9:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
EN 62841-3-9:2015/AC:2016-09
EN 62841-3-9:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
EN 62841-3-9:2015/AC:2016-09
EN 62841-3-9:2015/A11:2017
EN 62841-3-10:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
EN 62841-3-10:2015/AC:2016-07
EN 62841-3-10:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
EN 62841-3-10:2015/AC:2016-07
EN 62841-3-10:2015/A11:2017
EN 62841-3-10:2015
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
EN 62841-3-10:2015/AC:2016-07
EN 62841-3-10:2015/A11:2017
EN 62841-3-10:2015/A1:2022
EN 62841-3-10:2015/A12:2022
EN 62841-3-12:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines
EN 62841-3-13:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills
EN 62841-3-14:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners
EN 62841-4-1:2020
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws
EN 62841-4-2:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
EN 62841-4-2:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
EN 62841-4-2:2019/A1:2022
EN 62841-4-2:2019/A11:2022
EN IEC 60204-11:2019
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
EN IEC 60335-2-34:2023
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
EN IEC 60335-2-34:2023/A11:2023
EN IEC 60335-2-34:2023/A12:2025
EN IEC 60335-2-40:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN IEC 60335-2-40:2024/A11:2024
EN IEC 60335-2-41:2021
Household and similar electrical appliances - Safety - Particular requirements for pumps
EN IEC 60335-2-41:2021/A11:2021
EN IEC 60335-2-58:2025
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
EN IEC 60335-2-58:2025/A11:2025
EN IEC 60335-2-89:2022
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor
EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor
EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/AC:2023-11
EN IEC 60335-2-119:2024
Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances
EN IEC 60335-2-119:2024/A11:2024
EN IEC 62061:2021
Safety of machinery - Functional safety of safety-related control systems
EN IEC 62061:2021
Safety of machinery - Functional safety of safety-related control systems
EN IEC 62061:2021/A1:2024
EN IEC 62841-2-3:2021
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
EN IEC 62841-2-3:2021/A11:2021
EN IEC 62841-2-6:2020
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
EN IEC 62841-2-6:2020/A11:2020
EN IEC 62841-2-6:2020
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
EN IEC 62841-2-6:2020/A11:2020
EN IEC 62841-2-6:2020/A12:2024
EN IEC 62841-2-6:2020/AC:2024-11
EN IEC 62841-2-6:2020/A1:2024
EN IEC 62841-2-7:2024
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns
EN IEC 62841-2-7:2024/AC:2025-07
EN IEC 62841-2-7:2024/A11:2024
EN IEC 62841-2-12:2024
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
EN IEC 62841-2-12:2024/AC:2025-11
EN IEC 62841-2-12:2024/A11:2024
EN IEC 62841-2-18:2026
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-18: Particular requirements for hand-held strapping tools
EN IEC 62841-2-18:2026/A11:2026
EN IEC 62841-2-19:2025
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-19: Particular requirements for hand-held jointers
EN IEC 62841-2-19:2025/A11:2025
EN IEC 62841-2-20:2025
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-20: Particular requirements for hand-held band saws
EN IEC 62841-2-20:2025/A11:2025
EN IEC 62841-2-22:2025
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines
EN IEC 62841-2-22:2025/A11:2025
EN IEC 62841-2-23:2026
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-23: Particular requirements for hand-held die grinders and small rotary tools
EN IEC 62841-2-23:2026/A11:2026
EN IEC 62841-3-5:2022
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws
EN IEC 62841-3-5:2022/A11:2022
EN IEC 62841-3-7:2021
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws
EN IEC 62841-3-7:2021/A11:2021
EN IEC 62841-3-9:2020
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
EN IEC 62841-3-9:2020/A11:2020
EN IEC 62841-3-16:2026
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-16: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders
EN IEC 62841-3-16:2026/A11:2026
EN IEC 62841-4-3:2021
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
EN IEC 62841-4-3:2021/A11:2021
EN IEC 62841-4-4:2026
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws
EN IEC 62841-4-4:2026/A1:2026
EN IEC 62841-4-4:2026/A11:2026
EN IEC 62841-4-5:2021
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears
EN IEC 62841-4-5:2021/A11:2021
EN IEC 62841-4-5:2021
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears
EN IEC 62841-4-5:2021/A11:2021
EN IEC 62841-4-5:2021/AC:2024-01
EN IEC 62841-4-6:2024
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums
EN IEC 62841-4-6:2024/A11:2024
EN IEC 62841-4-7:2022
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
EN IEC 62841-4-7:2022/A11:2022
EN IEC 62841-4-7:2022
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
EN IEC 62841-4-7:2022/A11:2022
EN IEC 62841-4-7:2022/AC:2023-05
EN IEC 62841-4-7:2022/AC:2023-10
EN IEC 62841-4-8:2025
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers
EN IEC 62841-4-8:2025/A11:2025
EN ISO/IEC 80079-38:2016
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016/A1:2018
EN ISO 2151:2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
EN ISO 2860:2008
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
EN ISO 2867:2008
Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
EN ISO 2867:2011
Earth-moving machinery - Access systems (ISO 2867:2011)
EN ISO 3164:2008
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)
EN ISO 3164:2013
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013)
EN ISO 3164:2013
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013)
EN ISO 3164:2013/A1:2024
EN ISO 3266:2010
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
EN ISO 3266:2010
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
EN ISO 3266:2010/A1:2015
EN ISO 3411:2007
Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
EN ISO 3449:2008
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
EN ISO 3450:2008
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)
EN ISO 3450:2011
Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)
EN ISO 3457:2008
Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
EN ISO 3471:2008
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
EN ISO 3691-1:2015
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)
EN ISO 3691-1:2015/AC:2016
EN ISO 3691-1:2015
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)
EN ISO 3691-1:2015/AC:2016
EN ISO 3691-1:2015/A1:2020
EN ISO 3691-4:2023
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
EN ISO 3691-5:2009
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009)
EN ISO 3691-5:2014
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
EN ISO 3691-5:2014/AC:2014
EN ISO 3691-5:2015
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
EN ISO 3691-5:2015
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
EN ISO 3691-5:2015/A1:2020
EN ISO 3691-6:2013
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
EN ISO 3691-6:2013/AC:2014
EN ISO 3691-6:2015
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
EN ISO 3691-6:2015/AC:2016
EN ISO 3691-6:2021
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021)
EN ISO 3741:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001)
EN ISO 3741:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
EN ISO 3743-1:2009
Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994)
EN ISO 3743-1:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
EN ISO 3743-2:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
EN ISO 3743-2:2019
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)
EN ISO 3744:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)
EN ISO 3744:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN ISO 3744:2026
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2025, including corrected version 2026-01)
EN ISO 3745:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003)
EN ISO 3745:2012
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
EN ISO 3745:2012
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
EN ISO 3745:2012/A1:2017
EN ISO 3746:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
EN ISO 3746:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN ISO 3747:2009
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000)
EN ISO 3747:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
EN ISO 3991:2025
Agricultural machinery - Robotic feed systems - Safety (ISO 3991:2025)
EN ISO 4254-1:2009
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)
EN ISO 4254-1:2009/AC:2010
EN ISO 4254-1:2013
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
EN ISO 4254-1:2015
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
EN ISO 4254-1:2015
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
EN ISO 4254-1:2015/A1:2021
EN ISO 4254-5:2009
Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)
EN ISO 4254-5:2009/AC:2010
EN ISO 4254-5:2018
Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018)
EN ISO 4254-6:2009
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)
EN ISO 4254-6:2009/AC:2010
EN ISO 4254-6:2020
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
EN ISO 4254-6:2020/A11:2021
EN ISO 4254-7:2009
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)
EN ISO 4254-7:2009/AC:2010
EN ISO 4254-7:2017
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)
EN ISO 4254-7:2017
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)
EN ISO 4254-7:2017/A1:2026
EN ISO 4254-8:2018
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
EN ISO 4254-9:2018
Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)
EN ISO 4254-10:2009
Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
EN ISO 4254-10:2009/AC:2010
EN ISO 4254-11:2010
Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)
EN ISO 4254-11:2010
Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)
EN ISO 4254-11:2010/A1:2020
EN ISO 4254-12:2012
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)
EN ISO 4254-12:2012
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)
EN ISO 4254-12:2012/A1:2017
EN ISO 4254-14:2016
Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)
EN ISO 4254-17:2022
Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)
EN ISO 4254-20:2025
Agricultural machinery - Safety - Part 20: Grape, olives and coffee harvesters (ISO 4254-20:2025)
EN ISO 4413:2010
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 4414:2010
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 4871:2009
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 5010:2019
Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
EN ISO 5136:2009
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
EN ISO 5395-1:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)
EN ISO 5395-1:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)
EN ISO 5395-1:2013/A1:2018
EN ISO 5395-2:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
EN ISO 5395-2:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
EN ISO 5395-2:2013/A1:2016
EN ISO 5395-2:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)
EN ISO 5395-2:2013/A1:2016
EN ISO 5395-2:2013/A2:2017
EN ISO 5395-3:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
EN ISO 5395-3:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
EN ISO 5395-3:2013/A1:2017
EN ISO 5395-3:2013
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
EN ISO 5395-3:2013/A1:2017
EN ISO 5395-3:2013/A2:2018
EN ISO 5674:2009
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
EN ISO 6682:2008
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
EN ISO 6683:2008
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
EN ISO 6909
Machine tools - Safety - Press brakes (ISO/FDIS 6909:2025)
EN ISO 7096:2008
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)
EN ISO 7096:2008/AC:2009
EN ISO 7096:2020
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
EN ISO 7235:2009
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
EN ISO 7731:2008
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN ISO 8230-1:2008
Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN ISO 8230-2:2008
Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)
EN ISO 8230-3:2008
Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
EN ISO 8437-1:2021
Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests (ISO 8437-1:2019)
EN ISO 8437-1:2021/A1:2026
EN ISO 8437-2:2021
Snow throwers - Safety requirements and test procedures - Part 2: Pedestrian-controlled snow throwers (ISO 8437-2:2019)
EN ISO 8437-2:2021/A1:2026
EN ISO 8437-3:2021
Snow throwers - Safety requirements and test procedures - Part 3: Ride-on snow throwers (ISO 8437-3:2019)
EN ISO 8437-3:2021/A1:2026
EN ISO 8437-4:2021
Snow throwers - Safety requirements and test procedures - Part 4: Additional national and regional requirements (ISO 8437-4:2019)
EN ISO 8437-4:2021/A1:2026
EN ISO 8528-10:2022
Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022)
EN ISO 8528-13:2016
Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
EN ISO 8528-13:2026
Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO/FDIS 8528-13:2025)
EN ISO 9614-1:2009
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
EN ISO 9614-3:2009
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
EN ISO 9902-1:2001
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)
EN ISO 9902-1:2001/A1:2009
EN ISO 9902-1:2001
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)
EN ISO 9902-1:2001/A1:2009
EN ISO 9902-1:2001/A2:2014
EN ISO 9902-2:2001
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)
EN ISO 9902-2:2001/A1:2009
EN ISO 9902-2:2001
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)
EN ISO 9902-2:2001/A1:2009
EN ISO 9902-2:2001/A2:2014
EN ISO 9902-3:2001
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)
EN ISO 9902-3:2001/A1:2009
EN ISO 9902-3:2001
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)
EN ISO 9902-3:2001/A1:2009
EN ISO 9902-3:2001/A2:2014
EN ISO 9902-4:2001
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
EN ISO 9902-4:2001/A1:2009
EN ISO 9902-4:2001
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
EN ISO 9902-4:2001/A1:2009
EN ISO 9902-4:2001/A2:2014
EN ISO 9902-5:2001
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)
EN ISO 9902-5:2001/A1:2009
EN ISO 9902-5:2001
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)
EN ISO 9902-5:2001/A1:2009
EN ISO 9902-5:2001/A2:2014
EN ISO 9902-6:2001
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)
EN ISO 9902-6:2001/A1:2009
EN ISO 9902-6:2001
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)
EN ISO 9902-6:2001/A1:2009
EN ISO 9902-6:2001/A2:2014
EN ISO 9902-7:2001
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)
EN ISO 9902-7:2001/A1:2009
EN ISO 9902-7:2001
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)
EN ISO 9902-7:2001/A1:2009
EN ISO 9902-7:2001/A2:2014
EN ISO 10218-1:2008
Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007)
EN ISO 10218-1:2011
Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
EN ISO 10218-1:2025
Robotics - Safety requirements - Part 1: Industrial robots (ISO 10218-1:2025)
EN ISO 10218-2:2011
Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
EN ISO 10218-2:2025
Robotics - Safety requirements - Part 2: Industrial robot applications and robot cells (ISO 10218-2:2025)
EN ISO 10326-1:2016
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)
EN ISO 10472-1:2008
Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 10472-2:2008
Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
EN ISO 10472-3:2008
Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
EN ISO 10472-4:2008
Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
EN ISO 10472-5:2008
Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
EN ISO 10472-6:2008
Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
EN ISO 10517:2009
Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
EN ISO 10517:2009
Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
EN ISO 10517:2009/A1:2013
EN ISO 10517:2019
Powered hand-held hedge trimmers - Safety (ISO 10517:2019)
EN ISO 10821:2005
Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)
EN ISO 10821:2005/A1:2009
EN ISO 11102-1:2009
Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
EN ISO 11102-2:2009
Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
EN ISO 11111-1:2009
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)
EN ISO 11111-1:2016
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
EN ISO 11111-2:2005
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)
EN ISO 11111-2:2005/A1:2009
EN ISO 11111-2:2005
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)
EN ISO 11111-2:2005/A1:2009
EN ISO 11111-2:2005/A2:2016
EN ISO 11111-3:2005
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)
EN ISO 11111-3:2005/A1:2009
EN ISO 11111-3:2005
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)
EN ISO 11111-3:2005/A1:2009
EN ISO 11111-3:2005/A2:2016
EN ISO 11111-4:2005
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)
EN ISO 11111-4:2005/A1:2009
EN ISO 11111-4:2005
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)
EN ISO 11111-4:2005/A1:2009
EN ISO 11111-4:2005/A2:2016
EN ISO 11111-5:2005
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)
EN ISO 11111-5:2005/A1:2009
EN ISO 11111-5:2005
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)
EN ISO 11111-5:2005/A1:2009
EN ISO 11111-5:2005/A2:2016
EN ISO 11111-6:2005
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)
EN ISO 11111-6:2005/A1:2009
EN ISO 11111-6:2005
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)
EN ISO 11111-6:2005/A1:2009
EN ISO 11111-6:2005/A2:2016
EN ISO 11111-7:2005
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)
EN ISO 11111-7:2005/A1:2009
EN ISO 11111-7:2005
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)
EN ISO 11111-7:2005/A1:2009
EN ISO 11111-7:2005/A2:2016
EN ISO 11145:2008
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)
EN ISO 11145:2016
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016)
EN ISO 11148-1:2011
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
EN ISO 11148-2:2011
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)
EN ISO 11148-3:2010
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010)
EN ISO 11148-3:2012
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
EN ISO 11148-4:2010
Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools (ISO 11148-4:2010)
EN ISO 11148-4:2012
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
EN ISO 11148-5:2011
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
EN ISO 11148-6:2010
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)
EN ISO 11148-6:2012
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
EN ISO 11148-7:2012
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
EN ISO 11148-8:2011
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
EN ISO 11148-9:2011
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
EN ISO 11148-10:2011
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
EN ISO 11148-11:2011
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
EN ISO 11148-12:2012
Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
EN ISO 11148-13:2018
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
EN ISO 11161:2007
Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007)
EN ISO 11161:2007/A1:2010
EN ISO 11200:2009
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997)
EN ISO 11200:2014
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
EN ISO 11201:2009
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)
EN ISO 11201:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 11202:2009
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)
EN ISO 11202:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN ISO 11202:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN ISO 11202:2010/A1:2021
EN ISO 11203:2009
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
EN ISO 11203:2009
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
EN ISO 11203:2009/A1:2020
EN ISO 11204:2009
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997)
EN ISO 11204:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN ISO 11205:2009
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
EN ISO 11252:2008
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)
EN ISO 11252:2013
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
EN ISO 11546-1:2009
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN ISO 11546-2:2009
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
EN ISO 11553-1:2008
Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
EN ISO 11553-1:2020
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)
EN ISO 11553-1:2020/A11:2020
EN ISO 11553-2:2008
Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
EN ISO 11553-3:2013
Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)
EN ISO 11554:2008
Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
EN ISO 11554:2017
Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
EN ISO 11680-1:2008
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
EN ISO 11680-1:2011
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
EN ISO 11680-1:2021
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)
EN ISO 11680-2:2008
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)
EN ISO 11680-2:2011
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
EN ISO 11680-2:2021
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)
EN ISO 11680:2025
Machinery for forestry - Safety requirements and testing for portable pole mounted powered pruners (ISO 11680:2025)
EN ISO 11681-1:2008
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)
EN ISO 11681-1:2011
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)
EN ISO 11681-1:2022
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022)
EN ISO 11681-2:2008
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006)
EN ISO 11681-2:2011
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)
EN ISO 11681-2:2011
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)
EN ISO 11681-2:2011/A1:2017
EN ISO 11681-2:2022
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)
EN ISO 11688-1:2009
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 11691:2009
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
EN ISO 11806-1:2011
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)
EN ISO 11806-1:2022
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)
EN ISO 11806-2:2011
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)
EN ISO 11806-2:2022
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022)
EN ISO 11806:2008
Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
EN ISO 11850:2011
Machinery for forestry - General safety requirements (ISO 11850:2011)
EN ISO 11850:2011
Machinery for forestry - General safety requirements (ISO 11850:2011)
EN ISO 11850:2011/A1:2016
EN ISO 11850:2011
Machinery for forestry - General safety requirements (ISO 11850:2011)
EN ISO 11850:2011/A1:2016
EN ISO 11850:2011/A2:2022
Restriction: With regard to paragraph 4.4 a), first paragraph, first indentation, as well as reference to standard EN ISO 2867:2011, table 6 to paragraphs 8 and 9, maximum dimension for “A” and note a) maximum first step height dimension, this publication does not confer a presumption of conformity to the essential health and safety requirements 1.1.6., 1.5.15. and 1.6.2. of Annex I to Directive 2006/42/EC.
EN ISO 11957:2009
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
EN ISO 12100-1:2003
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-1:2003/A1:2009
EN ISO 12100-2:2003
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
EN ISO 12100-2:2003/A1:2009
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 13482:2014
Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
EN ISO 13732-1:2008
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 13732-3:2008
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
EN ISO 13753:2008
Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
EN ISO 13766-2:2018
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)
EN ISO 13849-1:2008
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)
EN ISO 13849-1:2008/AC:2009
EN ISO 13849-1:2015
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-1:2023
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN ISO 13849-2:2008
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)
EN ISO 13849-2:2012
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN ISO 13850:2008
Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)
EN ISO 13850:2015
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN ISO 13851:2019
Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019)
EN ISO 13854:2019
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)
EN ISO 13855:2010
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
EN ISO 13855:2024
Safety of machinery - Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024)
EN ISO 13856-1:2013
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
EN ISO 13856-2:2013
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
EN ISO 13856-3:2013
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
EN ISO 13857:2008
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 13857:2019
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)
EN ISO 14118:2018
Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)
EN ISO 14119:2013
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
EN ISO 14119:2025
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2024)
EN ISO 14119:2025/A11:2026
EN ISO 14120:2015
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
EN ISO 14121-1:2007
Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
EN ISO 14122-1:2001
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)
EN ISO 14122-1:2001/A1:2010
EN ISO 14122-1:2016
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
EN ISO 14122-2:2001
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001)
EN ISO 14122-2:2001/A1:2010
EN ISO 14122-2:2016
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
EN ISO 14122-3:2001
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)
EN ISO 14122-3:2001/A1:2010
EN ISO 14122-3:2016
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN ISO 14122-4:2004
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004)
EN ISO 14122-4:2004/A1:2010
EN ISO 14122-4:2016
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
EN ISO 14123-1:2015
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)
EN ISO 14123-2:2015
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)
EN ISO 14159:2008
Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)
EN ISO 14314:2009
Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
EN ISO 14738:2008
Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)
EN ISO 14982:2009
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
EN ISO 15012-4:2016
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)
EN ISO 15536-1:2008
Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)
EN ISO 15744:2008
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
EN ISO 16089:2015
Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
EN ISO 16089:2025
Machine tools - Safety - Stationary grinding machines (ISO 16089:2025)
EN ISO 16092-1:2018
Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
EN ISO 16092-2:2020
Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
EN ISO 16092-3:2018
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
EN ISO 16092-4:2020
Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)
EN ISO 16093:2017
Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
EN ISO 16119-1:2013
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)
EN ISO 16119-2:2013
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)
EN ISO 16119-3:2013
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
EN ISO 16119-4:2014
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
EN ISO 16230-1:2015
Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
EN ISO 16231-1:2013
Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)
EN ISO 16231-2:2015
Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)
EN ISO 17916:2016
Safety of thermal cutting machines (ISO 17916:2016)
EN ISO 18063-2:2021
Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)
EN ISO 18217:2015
Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
EN ISO 18497-1:2024
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 1: Machine design principles and vocabulary (ISO 18497-1:2024)
EN ISO 18497-2:2024
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 2: Design principles for obstacle protection systems (ISO 18497-2:2024)
EN ISO 18497-3:2024
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 3: Autonomous operating zones (ISO 18497-3:2024)
EN ISO 18497-4:2024
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 4: Verification methods and validation principles (ISO 18497-4:2024)
EN ISO 18497:2018
Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)
EN ISO 19085-1:2017
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
EN ISO 19085-1:2021
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)
EN ISO 19085-2:2017
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)
EN ISO 19085-2:2021
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
EN ISO 19085-3:2017
Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)
Restriction: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass.
EN ISO 19085-3:2021
Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021)
EN ISO 19085-4:2018
Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018)
EN ISO 19085-4:2024
Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2024)
EN ISO 19085-5:2017
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
EN ISO 19085-5:2024
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2024)
EN ISO 19085-6:2017
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)
EN ISO 19085-6:2024
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (toupie) (ISO 19085-6:2024)
EN ISO 19085-7:2019
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
EN ISO 19085-7:2024
Woodworking machines - Safety - Part 7: Surface planing, thickness planing and combined surface/thickness planing machines (ISO 19085-7:2024)
EN ISO 19085-8:2018
Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)
EN ISO 19085-8:2024
Woodworking machines - Safety - Part 8: Wide belt sanding machines and surface treating machines (ISO 19085-8:2024)
EN ISO 19085-9:2020
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019)
EN ISO 19085-9:2024
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)
EN ISO 19085-10:2019
Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018)
EN ISO 19085-10:2019/A11:2020
EN ISO 19085-11:2020
Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020)
EN ISO 19085-11:2024
Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2024)
EN ISO 19085-12:2021
Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)
EN ISO 19085-12:2021/A11:2023
EN ISO 19085-12:2024
Woodworking machines - Safety - Part 12: Tenoning-profiling machines (ISO 19085-12:2024)
EN ISO 19085-13:2020
Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)
EN ISO 19085-13:2025
Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2025)
EN ISO 19085-14:2021
Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)
EN ISO 19085-15:2021
Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)
EN ISO 19085-15:2025
Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2025)
EN ISO 19085-16:2021
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)
EN ISO 19085-17:2021
Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)
EN ISO 19225:2017
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
EN ISO 19225:2017
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
EN ISO 19225:2017/A1:2019
EN ISO 19296:2018
Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)
EN ISO 19353:2016
Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)
EN ISO 19353:2019
Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)
EN ISO 19432-1:2020
Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)
EN ISO 19432:2008
Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)
EN ISO 19432:2012
Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
EN ISO 19472-2:2022
Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)
EN ISO 19932-1:2013
Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
EN ISO 19932-1:2025
Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2025)
EN ISO 19932-2:2013
Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)
EN ISO 19932-2:2025
Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2025)
EN ISO 20361:2009
Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)
EN ISO 20361:2015
Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
EN ISO 20361:2019
Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)
EN ISO 20361:2019/A11:2020
EN ISO 20430:2020
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
EN ISO 20607:2019
Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019)
EN ISO 20643:2008
Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)
EN ISO 20643:2008
Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)
EN ISO 20643:2008/A1:2012
EN ISO 21904-1:2020
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)
EN ISO 22291:2022
Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022)
EN ISO 22867:2008
Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)
EN ISO 22867:2011
Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
EN ISO 22867:2021
Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
EN ISO 22868:2008
Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005)
EN ISO 22868:2011
Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)
EN ISO 22868:2021
Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)
EN ISO 23062:2022
Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
EN ISO 23063:2025
Foundry machinery - Safety requirements for high pressure die casting machines (ISO 23063:2024)
EN ISO 23125:2010
Machine tools - Safety - Turning machines (ISO 23125:2010)
EN ISO 23125:2010
Machine tools - Safety - Turning machines (ISO 23125:2010)
EN ISO 23125:2010/A1:2012
EN ISO 23125:2015
Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
EN ISO 23779:2025
Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024)
EN ISO 25119-1:2023
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)
EN ISO 25119-1:2023/A1:2023
EN ISO 25119-2:2023
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019)
EN ISO 25119-3:2023
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018)
EN ISO 25119-3:2023/A1:2023
EN ISO 25119-4:2023
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018)
EN ISO 25119-4:2023/A1:2023
EN ISO 28139:2009
Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)
EN ISO 28139:2021
Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods (ISO 28139:2019)
EN ISO 28139:2021/A1:2024
EN ISO 28881:2013
Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)
EN ISO 28881:2013/AC:2013
EN ISO 28881:2022
Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)
EN ISO 28927-1:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)
EN ISO 28927-1:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)
EN ISO 28927-1:2009/A1:2017
EN ISO 28927-1:2019
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
EN ISO 28927-2:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
EN ISO 28927-2:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
EN ISO 28927-2:2009/A1:2017
EN ISO 28927-3:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
EN ISO 28927-4:2010
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
EN ISO 28927-4:2010
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
EN ISO 28927-4:2010/A1:2018
EN ISO 28927-5:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
EN ISO 28927-5:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
EN ISO 28927-5:2009/A1:2015
EN ISO 28927-6:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)
EN ISO 28927-7:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)
EN ISO 28927-8:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)
EN ISO 28927-8:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)
EN ISO 28927-8:2009/A1:2015
EN ISO 28927-9:2009
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
EN ISO 28927-10:2011
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)
EN ISO 28927-11:2011
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)
EN ISO 28927-12:2012
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
EN ISO 28927-13:2022
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
EN ISO/ASTM 52938-1:2025
Additive manufacturing of metals - Environment, health and safety - Part 1: Safety requirements for PBF-LB machines (ISO/ASTM 52938-1:2025)
